# -*- text -*-
##
## mods-available/sql -- SQL modules
##
##	$Id: 7bcb664d32fecca0cd20c1d81bac13f0e1b9991b $

######################################################################
#
#  Configuration for the SQL module
#
#  The database schemas and queries are located in subdirectories:
#
#	sql/<DB>/main/schema.sql	Schema
#	sql/<DB>/main/queries.conf	Authorisation and Accounting queries
#
#  Where "DB" is mysql, mssql, oracle, or postgresql.
#
#  The name used to query SQL is sql_user_name, which is set in the file
#
#     raddb/mods-config/sql/main/${dialect}/queries.conf
#
#  If you are using realms, that configuration should be changed to use
#  the Stripped-User-Name attribute.  See the comments around sql_user_name
#  for more information.
#

sql {
	#
	#  The dialect of SQL being used.
	#
	#  Allowed dialects are:
	#
	#	mssql
	#	mysql
	#	oracle
	#	postgresql
	#	sqlite
	#	mongo
	#
	dialect = "sqlite"

	#
	#  The driver module used to execute the queries.  Since we
	#  don't know which SQL drivers are being used, the default is
	#  "rlm_sql_null", which just logs the queries to disk via the
	#  "logfile" directive, below.
	#
	#  In order to talk to a real database, delete the next line,
	#  and uncomment the one after it.
	#
	#  If the dialect is "mssql", then the driver should be set to
	#  one of the following values, depending on your system:
	#
	#	rlm_sql_db2
	#	rlm_sql_firebird
	#	rlm_sql_freetds
	#	rlm_sql_iodbc
	#	rlm_sql_unixodbc
	#
	driver = "rlm_sql_null"
#	driver = "rlm_sql_${dialect}"

	#
	#  Driver-specific subsections.  They will only be loaded and
	#  used if "driver" is something other than "rlm_sql_null".
	#  When a real driver is used, the relevant driver
	#  configuration section is loaded, and all other driver
	#  configuration sections are ignored.
	#
	sqlite {
		# Path to the sqlite database
		filename = "/tmp/freeradius.db"

		# How long to wait for write locks on the database to be
		# released (in ms) before giving up.
		busy_timeout = 200

		# If the file above does not exist and bootstrap is set
		# a new database file will be created, and the SQL statements
		# contained within the bootstrap file will be executed.
		bootstrap = "${modconfdir}/${..:name}/main/sqlite/schema.sql"
	}

	mysql {
		# If any of the files below are set, TLS encryption is enabled
		tls {
			ca_file = "/etc/ssl/certs/my_ca.crt"
			ca_path = "/etc/ssl/certs/"
			certificate_file = "/etc/ssl/certs/private/client.crt"
			private_key_file = "/etc/ssl/certs/private/client.key"
			cipher = "DHE-RSA-AES256-SHA:AES128-SHA"

			tls_required = yes
			tls_check_cert = no
			tls_check_cert_cn = no
		}

		# If yes, (or auto and libmysqlclient reports warnings are
		# available), will retrieve and log additional warnings from
		# the server if an error has occured. Defaults to 'auto'
		warnings = auto
	}

	postgresql {

		# unlike MySQL, which has a tls{} connection configuration, postgresql
		# uses its connection parameters - see the radius_db option below in
		# this file

		# Send application_name to the postgres server
		# Only supported in PG 9.0 and greater. Defaults to no.
		send_application_name = yes

		#
		#  The default application name is "FreeRADIUS - .." with the current version.
		#  The application name can be customized here to any non-zero value.
		#
#		application_name = ""
	}

	#
	#	Configuration for Mongo.
	#
	#	Note that the Mongo driver is experimental.  The FreeRADIUS developers
	#	are unable to help with the syntax of the Mongo queries.  Please see
	#	the Mongo documentation for that syntax.
	#
	#	The Mongo driver supports only the following methods:
	#
	#		aggregate
	#		findAndModify
	#		findOne
	#		insert
	#
	#	For examples, see the query files:
	#
	#		raddb/mods-config/sql/main/mongo/queries.conf
	#		raddb/mods-config/sql/main/ippool/queries.conf
	#
	#	In order to use findAndModify with an aggretation pipleline, make
	#	sure that you are running MongoDB version 4.2 or greater. FreeRADIUS
	#	assumes that the paramaters passed to the methods are supported by the
	#	version of MongoDB which it is connected to.
	#
	mongo {
		#
		#  The application name to use.
		#
		appname = "freeradius"

		#
		#  The TLS parameters here map directly to the Mongo TLS configuration
		#
		tls {
			certificate_file = /path/to/file
			certificate_password = "password"
			ca_file = /path/to/file
			ca_dir = /path/to/directory
			crl_file = /path/to/file
			weak_cert_validation = false
			allow_invalid_hostname = false
		}
	}

	# Connection info:
	#
#	server = "localhost"
#	port = 3306
#	login = "radius"
#	password = "radpass"

	# Connection info for Mongo
	# Authentication Without SSL
	#	server = "mongodb://USER:PASSWORD@192.16.0.2:PORT/DATABASE?authSource=admin&ssl=false"

	# Authentication With SSL
	#	server = "mongodb://USER:PASSWORD@192.16.0.2:PORT/DATABASE?authSource=admin&ssl=true"

	# Authentication with Certificate
	# Use this command for retrieve Derived username:
	# openssl x509 -in mycert.pem -inform PEM -subject -nameopt RFC2253
	# server = mongodb://<DERIVED USERNAME>@192.168.0.2:PORT/DATABASE?authSource=$external&ssl=true&authMechanism=MONGODB-X509

	# Database table configuration for everything except Oracle
	radius_db = "radius"

	# If you are using Oracle then use this instead
#	radius_db = "(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1521))(CONNECT_DATA=(SID=your_sid)))"

	# If you're using postgresql this can also be used instead of the connection info parameters
#	radius_db = "dbname=radius host=localhost user=radius password=raddpass"

        # Postgreql doesn't take tls{} options in its module config like mysql does - if you want to
        # use SSL connections then use this form of connection info parameter
#	radius_db = "host=localhost port=5432 dbname=radius user=radius password=raddpass sslmode=verify-full sslcert=/etc/ssl/client.crt sslkey=/etc/ssl/client.key sslrootcert=/etc/ssl/ca.crt" 

	# If you want both stop and start records logged to the
	# same SQL table, leave this as is.  If you want them in
	# different tables, put the start table in acct_table1
	# and stop table in acct_table2
	acct_table1 = "radacct"
	acct_table2 = "radacct"

	# Allow for storing data after authentication
	postauth_table = "radpostauth"

	# Tables containing 'check' items
	authcheck_table = "radcheck"
	groupcheck_table = "radgroupcheck"

	# Tables containing 'reply' items
	authreply_table = "radreply"
	groupreply_table = "radgroupreply"

	# Table to keep group info
	usergroup_table = "radusergroup"

	# If set to 'yes' (default) we read the group tables unless Fall-Through = no in the reply table.
	# If set to 'no' we do not read the group tables unless Fall-Through = yes in the reply table.
#	read_groups = yes

	# If set to 'yes' (default) we read profiles unless Fall-Through = no in the groupreply table.
	# If set to 'no' we do not read profiles unless Fall-Through = yes in the groupreply table.
#	read_profiles = yes

	# Remove stale session if checkrad does not see a double login
	delete_stale_sessions = yes

	# Write SQL queries to a logfile. This is potentially useful for tracing
	# issues with authorization queries.  See also "logfile" directives in
	# mods-config/sql/main/*/queries.conf.  You can enable per-section logging
	# by enabling "logfile" there, or global logging by enabling "logfile" here.
	#
	# Per-section logging can be disabled by setting "logfile = ''"
#	logfile = ${logdir}/sqllog.sql

	#  Set the maximum query duration and connection timeout
	#  for rlm_sql_mysql.
#	query_timeout = 5

	#  As of v3, the "pool" section has replaced the
	#  following v2 configuration items:
	#
	#  num_sql_socks
	#  connect_failure_retry_delay
	#  lifetime
	#  max_queries

	#
	#  The connection pool is used to pool outgoing connections.
	#
	# When the server is not threaded, the connection pool
	# limits are ignored, and only one connection is used.
	#
	# If you want to have multiple SQL modules re-use the same
	# connection pool, use "pool = name" instead of a "pool"
	# section.  e.g.
	#
	#	sql sql1 {
	#	    ...
	#	    pool {
	#	    	 ...
	#	    }
	#	}
	#
	#	# sql2 will use the connection pool from sql1
	#	sql sql2 {
	#	     ...
	#	     pool = sql1
	#	}
	#
	pool {
		#  Connections to create during module instantiation.
		#  If the server cannot create specified number of
		#  connections during instantiation it will exit.
		#  Set to 0 to allow the server to start without the
		#  database being available.
		start = ${thread[pool].start_servers}

		#  Minimum number of connections to keep open
		min = ${thread[pool].min_spare_servers}

		#  Maximum number of connections
		#
		#  If these connections are all in use and a new one
		#  is requested, the request will NOT get a connection.
		#
		#  Setting 'max' to LESS than the number of threads means
		#  that some threads may starve, and you will see errors
		#  like 'No connections available and at max connection limit'
		#
		#  Setting 'max' to MORE than the number of threads means
		#  that there are more connections than necessary.
		max = ${thread[pool].max_servers}

		#  Spare connections to be left idle
		#
		#  NOTE: Idle connections WILL be closed if "idle_timeout"
		#  is set.  This should be less than or equal to "max" above.
		spare = ${thread[pool].max_spare_servers}

		#  Number of uses before the connection is closed
		#
		#  0 means "infinite"
		uses = 0

		#  The number of seconds to wait after the server tries
		#  to open a connection, and fails.  During this time,
		#  no new connections will be opened.
		retry_delay = 30

		# The lifetime (in seconds) of the connection
		lifetime = 0

		#  idle timeout (in seconds).  A connection which is
		#  unused for this length of time will be closed.
		idle_timeout = 60

		#  NOTE: All configuration settings are enforced.  If a
		#  connection is closed because of "idle_timeout",
		#  "uses", or "lifetime", then the total number of
		#  connections MAY fall below "min".  When that
		#  happens, it will open a new connection.  It will
		#  also log a WARNING message.
		#
		#  The solution is to either lower the "min" connections,
		#  or increase lifetime/idle_timeout.
	}

	# Set to 'yes' to read radius clients from the database ('nas' table)
	# Clients will ONLY be read on server startup.
	#
	#  A client can be link to a virtual server via the SQL
	#  module.  This link is done via the following process:
	#
	#  If there is no listener in a virtual server, SQL clients
	#  are added to the global list for that virtual server.
	#
	#  If there is a listener, and the first listener does not
	#  have a "clients=..." configuration item, SQL clients are
	#  added to the global list.
	#
	#  If there is a listener, and the first one does have a
	#  "clients=..." configuration item, SQL clients are added to
	#  that list.  The client { ...} ` configured in that list are
	#  also added for that listener.
	#
	#  The only issue is if you have multiple listeners in a
	#  virtual server, each with a different client list, then
	#  the SQL clients are added only to the first listener.
	#
#	read_clients = yes

	# Table to keep radius client info
	client_table = "nas"

	#
	# The group attribute specific to this instance of rlm_sql
	#

	# This entry should be used for additional instances (sql foo {})
	# of the SQL module.
#	group_attribute = "${.:instance}-SQL-Group"

	# This entry should be used for the default instance (sql {})
	# of the SQL module.
	group_attribute = "SQL-Group"

	# Read database-specific queries
	$INCLUDE ${modconfdir}/${.:name}/main/${dialect}/queries.conf
}