# -*- text -*-
######################################################################
#
#	In 2.0.0, radrelay functionality is integrated into the
#	server core.  This virtual server gives an example of
#	using radrelay functionality inside of the server.
#
#	In this example, the detail file is read, and the data
#	is put into SQL.  This configuration is used when a RADIUS
#	server on this machine is receiving accounting packets,
#	and writing them to the detail file.
#
#	The purpose of this virtual server is to de-couple the storage
#	of long-term accounting data in SQL from "live" information
#	needed by the RADIUS server as it is running.
#
#	The benefit of this approach is that for a busy server, the
#	overhead of performing SQL queries may be significant.  Also,
#	if the SQL databases are large (as is typical for ones storing
#	months of data), the INSERTs and UPDATEs may take a relatively
#	long time.  Rather than slowing down the RADIUS server by
#	having it interact with a database, you can just log the
#	packets to a detail file, and then read that file later at a
#	time when the RADIUS server is typically lightly loaded.
#
#	If you use on virtual server to log to the detail file,
#	and another virtual server (i.e. this one) to read from
#	the detail file, then this process will happen automatically.
#	A sudden spike of RADIUS traffic means that the detail file
#	will grow in size, and the server will be able to handle
#	large volumes of traffic quickly.  When the traffic dies down,
#	the server will have time to read the detail file, and insert
#	the data into a long-term SQL database.
#
#	$Id: 74574ac5a36d446b2a72dcae64d1c0a1992014c8 $
#
######################################################################

server buffered-sql {
	listen {
		type = detail

		#  The location where the detail file is located.
		#  This should be on local disk, and NOT on an NFS
		#  mounted location!
		#
		#  On most systems, this should support file globbing
		#  e.g. "${radacctdir}/detail-*:*"
		#  This lets you write many smaller detail files as in
		#  the example in radiusd.conf: ".../detail-%Y%m%d:%H"
		#  Writing many small files is often better than writing
		#  one large file.  File globbing also means that with
		#  a common naming scheme for detail files, then you can
		#  have many detail file writers, and only one reader.
		#
		filename = "${radacctdir}/detail-*"

		#
		#  The server can read accounting packets from the
		#  detail file much more quickly than those packets
		#  can be written to a database.  If the database is
		#  overloaded, then bad things can happen.
		#
		#  The server will keep track of how long it takes to
		#  process an entry from the detail file.  It will
		#  then pause between handling entries.  This pause
		#  allows databases to "catch up", and gives the
		#  server time to notice that other packets may have
		#  arrived.
		#
		#  The pause is calculated dynamically, to ensure that
		#  the load due to reading the detail files is limited
		#  to a small percentage of CPU time.  The
		#  "load_factor" configuration item is a number
		#  between 1 and 100.  The server will try to keep the
		#  percentage of time taken by "detail" file entries
		#  to "load_factor" percentage of the CPU time.
		#
		#  If the "load_factor" is set to 100, then the server
		#  will read packets as fast as it can, usually
		#  causing databases to go into overload.
		#
		load_factor = 10

		#
		#  Set the interval for polling the detail file.
		#  If the detail file doesn't exist, the server will
		#  wake up, and poll for it every N seconds.
		#
		#  Useful range of values: 1 to 60
		#
		poll_interval = 1

		#
		#  Set the retry interval for when the home server
		#  does not respond.  The current packet will be
		#  sent repeatedly, at this interval, until the
		#  home server responds.
		#
		#  Useful range of values: 5 to 30
		#
		retry_interval = 30

		#
		#  Track progress through the detail file.  When the detail
		#  file is large, and the server is re-started, it will
		#  read from the START of the file.
		#
		#  Setting "track = yes" means it will skip packets which
		#  have already been processed.  The default is "no".
		#
	#	track = yes

		#
		#  In some circumstances it may be desirable for the
		#  server to start up, process a detail file, and
		#  immediately quit. To do this enable the "one_shot"
		#  option below.
		#
		#  Do not enable this for normal server operation. The
		#  default is "no".
		#
	#	one_shot = no
	}

	#
	#  Pre-accounting.  Decide which accounting type to use.
	#
	preacct {
		preprocess

		#
		#  Ensure that we have a semi-unique identifier for every
		#  request, and many NAS boxes are broken.
		acct_unique

		#
		#  Read the 'acct_users' file.  This isn't always
		#  necessary, and can be deleted if you do not use it.
		files
	}

	#
	#  Accounting.  Log the accounting data.
	#
	accounting {
		#
		#  Log traffic to an SQL database.
		#
		#  See "Accounting queries" in mods-config/sql/main/$driver/queries.conf
	#	sql


		#  Cisco VoIP specific bulk accounting
	#	pgsql-voip

	}

	# The requests are not being proxied, so no pre/post-proxy
	# sections are necessary.
}