gdbserver comm prog [args...] gdbserver –attach comm pid gdbserver –multi comm
gdbserver is a program that allows you to run gdb on a different machine than the one which is running the program being debugged.
First, you need to have a copy of the program you want to debug put onto the target system. The program can be stripped to save space if needed, as gdbserver doesn't care about symbols. All symbol handling is taken care of by the gdb running on the host system.
To use the server, you log on to the target system, and run the gdbserver program. You must tell it (a) how to communicate with gdb, (b) the name of your program, and (c) its arguments. The general syntax is:
target> gdbserver comm program [args ...]
For example, using a serial port, you might say:
target> gdbserver /dev/com1 emacs foo.txt
This tells gdbserver to debug emacs with an argument of foo.txt, and to communicate with gdb via /dev/com1. gdbserver now waits patiently for the host gdb to communicate with it.
To use a TCP connection, you could say:
target> gdbserver host:2345 emacs foo.txt
This says pretty much the same thing as the last example, except that we are
going to communicate with the host gdb via TCP. The host:2345 argument means
that we are expecting to see a TCP connection from host to local TCP port
2345. (Currently, the host part is ignored.) You can choose any number you
want for the port number as long as it does not conflict with any existing TCP
ports on the target system. This same port number must be used in the host
gdbs target remote command, which will be described shortly. Note that if
you chose a port number that conflicts with another service, gdbserver will
print an error message and exit.
gdbserver can also attach to running programs. This is accomplished via the --attach argument. The syntax is:
target> gdbserver --attach comm pid
pid is the process ID of a currently running process. It isn't necessary to point gdbserver at a binary for the running process.
To start gdbserver without supplying an initial command to run
or process ID to attach, use the --multi command line option.
In such case you should connect using target extended-remote to start
the program you want to debug.
target> gdbserver --multi comm
You need an unstripped copy of the target program on your host system, since
gdb needs to examine it's symbol tables and such. Start up gdb as you normally
would, with the target program as the first argument. (You may need to use the
--baud option if the serial line is running at anything except 9600 baud.)
That is gdb TARGET-PROG, or gdb --baud BAUD TARGET-PROG. After that, the only
new command you need to know about is target remote
(or target extended-remote). Its argument is either
a device name (usually a serial device, like /dev/ttyb), or a HOST:PORT
descriptor. For example:
(gdb) target remote /dev/ttyb
communicates with the server via serial line /dev/ttyb, and:
(gdb) target remote the-target:2345
communicates via a TCP connection to port 2345 on host `the-target', where you previously started up gdbserver with the same port number. Note that for TCP connections, you must start up gdbserver prior to using the `target remote' command, otherwise you may get an error that looks something like `Connection refused'.
gdbserver can also debug multiple inferiors at once,
described in
Inferiors and Programs.
In such case use the extended-remote gdb command variant:
(gdb) target extended-remote the-target:2345
The gdbserver option --multi may or may not be used in such case.
There are three different modes for invoking gdbserver:
gdbserver comm prog [args...]
The comm parameter specifies how should the server communicate
with gdb; it is either a device name (to use a serial line),
a TCP port number (:1234), or - or stdio to use
stdin/stdout of gdbserver. Specify the name of the program to
debug in prog. Any remaining arguments will be passed to the
program verbatim. When the program exits, gdb will close the
connection, and gdbserver will exit.
gdbserver --attach comm pid
The comm parameter is as described above. Supply the process ID
of a running program in pid; gdb will do everything
else. Like with the previous mode, when the process pid exits,
gdb will close the connection, and gdbserver will exit.
gdbserver --multi comm
In this mode, gdb can instruct gdbserver which command(s) to run. Unlike the other 2 modes, gdb will not close the connection when a process being debugged exits, so you can debug several processes in the same session.
In each of the modes you may specify these options:
target> gdbserver --attach comm pid
pid is the process ID of a currently running process. It isn't
necessary to point gdbserver at a binary for the running process.
gdbserver without supplying an initial command to run
or process ID to attach, use this command line option.
Then you can connect using target extended-remote and start
the program you want to debug. The syntax is:
target> gdbserver --multi comm
gdbserver to display extra status information about the debugging
process.
This option is intended for gdbserver development and for bug reports to
the developers.
gdbserver to display remote protocol debug output.
This option is intended for gdbserver development and for bug reports to
the developers.
gdbserver to include extra information in each line
of debugging output.
See Other Command-Line Arguments for gdbserver.
gdbserver
with the --once option, it will stop listening for any further
connection attempts after connecting to the first gdb session.