NEXMON_CHIP=CHIP_VER_BCM43430a1
NEXMON_CHIP_NUM=`$(NEXMON_ROOT)/buildtools/scripts/getdefine.sh $(NEXMON_CHIP)`
NEXMON_FW_VERSION=FW_VER_7_45_41_46
NEXMON_FW_VERSION_NUM=`$(NEXMON_ROOT)/buildtools/scripts/getdefine.sh $(NEXMON_FW_VERSION)`

NEXMON_ARCH=armv7-m

RAM_FILE=brcmfmac43430-sdio.bin
RAMSTART=0x0
RAMSIZE=0x80000

ROM_FILE=rom.bin
ROMSTART=0x800000
ROMSIZE=0xA0000

WLC_UCODE_WRITE_BL_HOOK_ADDR = 0x45608
HNDRTE_RECLAIM_0_END_PTR = 0x2684
HNDRTE_RECLAIM_0_END = 0x5ad9c

PATCHSIZE=0x2000
PATCHSTART=$$(($(HNDRTE_RECLAIM_0_END) - $(PATCHSIZE)))

# original ucode start and size
UCODESTART = 0x4f4b8
UCODESIZE = 0xb2a3

# original template ram start and size
TEMPLATERAMSTART_PTR = 0x4f3b8
TEMPLATERAMSTART = 0x5a75c
TEMPLATERAMSIZE = 0x640

FP_DATA_END_PTR = 0x39574
FP_CONFIG_BASE_PTR_1 = 0x3b0ec
FP_CONFIG_END_PTR_1 = 0x3b0e8
FP_CONFIG_BASE_PTR_2 = 0x3b364
FP_CONFIG_END_PTR_2 = 0x3b360
# can start at the end of the firmware, it will be overwritten after it is read
FP_CONFIG_BASE=0x5AEB0
FP_DATA_BASE = 0x1000
FP_CONFIG_SIZE = 0xc00
FP_CONFIG_ORIGBASE = 0x1800
FP_CONFIG_ORIGEND = 0x2094