Top |
gboolean | g_type_module_use () |
void | g_type_module_unuse () |
void | g_type_module_set_name () |
GType | g_type_module_register_type () |
void | g_type_module_add_interface () |
GType | g_type_module_register_enum () |
GType | g_type_module_register_flags () |
#define | G_DEFINE_DYNAMIC_TYPE() |
#define | G_DEFINE_DYNAMIC_TYPE_EXTENDED() |
#define | G_IMPLEMENT_INTERFACE_DYNAMIC() |
#define | G_ADD_PRIVATE_DYNAMIC() |
GTypeModule provides a simple implementation of the GTypePlugin
interface. The model of GTypeModule is a dynamically loaded module
which implements some number of types and interface implementations.
When the module is loaded, it registers its types and interfaces
using g_type_module_register_type()
and g_type_module_add_interface()
.
As long as any instances of these types and interface implementations
are in use, the module is kept loaded. When the types and interfaces
are gone, the module may be unloaded. If the types and interfaces
become used again, the module will be reloaded. Note that the last
unref cannot happen in module code, since that would lead to the
caller's code being unloaded before g_object_unref()
returns to it.
Keeping track of whether the module should be loaded or not is done by
using a use count - it starts at zero, and whenever it is greater than
zero, the module is loaded. The use count is maintained internally by
the type system, but also can be explicitly controlled by
g_type_module_use()
and g_type_module_unuse()
. Typically, when loading
a module for the first type, g_type_module_use()
will be used to load
it so that it can initialize its types. At some later point, when the
module no longer needs to be loaded except for the type
implementations it contains, g_type_module_unuse()
is called.
GTypeModule does not actually provide any implementation of module loading and unloading. To create a particular module type you must derive from GTypeModule and implement the load and unload functions in GTypeModuleClass.
gboolean
g_type_module_use (GTypeModule *module
);
Increases the use count of a GTypeModule by one. If the use count was zero before, the plugin will be loaded. If loading the plugin fails, the use count is reset to its prior value.
void
g_type_module_unuse (GTypeModule *module
);
Decreases the use count of a GTypeModule by one. If the result is zero, the module will be unloaded. (However, the GTypeModule will not be freed, and types associated with the GTypeModule are not unregistered. Once a GTypeModule is initialized, it must exist forever.)
void g_type_module_set_name (GTypeModule *module
,const gchar *name
);
Sets the name for a GTypeModule
GType g_type_module_register_type (GTypeModule *module
,GType parent_type
,const gchar *type_name
,const GTypeInfo *type_info
,GTypeFlags flags
);
Looks up or registers a type that is implemented with a particular
type plugin. If a type with name type_name
was previously registered,
the GType identifier for the type is returned, otherwise the type
is newly registered, and the resulting GType identifier returned.
When reregistering a type (typically because a module is unloaded
then reloaded, and reinitialized), module
and parent_type
must
be the same as they were previously.
As long as any instances of the type exist, the type plugin will not be unloaded.
void g_type_module_add_interface (GTypeModule *module
,GType instance_type
,GType interface_type
,const GInterfaceInfo *interface_info
);
Registers an additional interface for a type, whose interface lives in the given type plugin. If the interface was already registered for the type in this plugin, nothing will be done.
As long as any instances of the type exist, the type plugin will not be unloaded.
GType g_type_module_register_enum (GTypeModule *module
,const gchar *name
,const GEnumValue *const_static_values
);
Looks up or registers an enumeration that is implemented with a particular
type plugin. If a type with name type_name
was previously registered,
the GType identifier for the type is returned, otherwise the type
is newly registered, and the resulting GType identifier returned.
As long as any instances of the type exist, the type plugin will not be unloaded.
module |
||
name |
name for the type |
|
const_static_values |
an array of GEnumValue structs for the possible enumeration values. The array is terminated by a struct with all members being 0. |
Since: 2.6
GType g_type_module_register_flags (GTypeModule *module
,const gchar *name
,const GFlagsValue *const_static_values
);
Looks up or registers a flags type that is implemented with a particular
type plugin. If a type with name type_name
was previously registered,
the GType identifier for the type is returned, otherwise the type
is newly registered, and the resulting GType identifier returned.
As long as any instances of the type exist, the type plugin will not be unloaded.
module |
||
name |
name for the type |
|
const_static_values |
an array of GFlagsValue structs for the possible flags values. The array is terminated by a struct with all members being 0. |
Since: 2.6
#define G_DEFINE_DYNAMIC_TYPE(TN, t_n, T_P) G_DEFINE_DYNAMIC_TYPE_EXTENDED (TN, t_n, T_P, 0, {})
A convenience macro for dynamic type implementations, which declares a
class initialization function, an instance initialization function (see
GTypeInfo for information about these) and a static variable named
t_n
<!-- -->_parent_class pointing to the parent class. Furthermore,
it defines a *_get_type()
and a static *_register_type()
functions
for use in your
.module_init()
See G_DEFINE_DYNAMIC_TYPE_EXTENDED()
for an example.
TN |
The name of the new type, in Camel case. |
|
t_n |
The name of the new type, in lowercase, with words separated by '_'. |
|
T_P |
The GType of the parent type. |
Since: 2.14
#define G_DEFINE_DYNAMIC_TYPE_EXTENDED(TypeName, type_name, TYPE_PARENT, flags, CODE)
A more general version of G_DEFINE_DYNAMIC_TYPE()
which
allows to specify GTypeFlags and custom code.
1 2 3 4 5 6 |
G_DEFINE_DYNAMIC_TYPE_EXTENDED (GtkGadget, gtk_gadget, GTK_TYPE_THING, 0, G_IMPLEMENT_INTERFACE_DYNAMIC (TYPE_GIZMO, gtk_gadget_gizmo_init)); |
expands to
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 |
static void gtk_gadget_init (GtkGadget *self); static void gtk_gadget_class_init (GtkGadgetClass *klass); static void gtk_gadget_class_finalize (GtkGadgetClass *klass); static gpointer gtk_gadget_parent_class = NULL; static GType gtk_gadget_type_id = 0; static void gtk_gadget_class_intern_init (gpointer klass) { gtk_gadget_parent_class = g_type_class_peek_parent (klass); gtk_gadget_class_init ((GtkGadgetClass*) klass); } GType gtk_gadget_get_type (void) { return gtk_gadget_type_id; } static void gtk_gadget_register_type (GTypeModule *type_module) { const GTypeInfo g_define_type_info = { sizeof (GtkGadgetClass), (GBaseInitFunc) NULL, (GBaseFinalizeFunc) NULL, (GClassInitFunc) gtk_gadget_class_intern_init, (GClassFinalizeFunc) gtk_gadget_class_finalize, NULL, // class_data sizeof (GtkGadget), 0, // n_preallocs (GInstanceInitFunc) gtk_gadget_init, NULL // value_table }; gtk_gadget_type_id = g_type_module_register_type (type_module, GTK_TYPE_THING, "GtkGadget", &g_define_type_info, (GTypeFlags) flags); { const GInterfaceInfo g_implement_interface_info = { (GInterfaceInitFunc) gtk_gadget_gizmo_init }; g_type_module_add_interface (type_module, g_define_type_id, TYPE_GIZMO, &g_implement_interface_info); } } |
TypeName |
The name of the new type, in Camel case. |
|
type_name |
The name of the new type, in lowercase, with words separated by '_'. |
|
TYPE_PARENT |
The GType of the parent type. |
|
flags |
GTypeFlags to pass to |
|
CODE |
Custom code that gets inserted in the *_get_type() function. |
Since: 2.14
#define G_IMPLEMENT_INTERFACE_DYNAMIC(TYPE_IFACE, iface_init)
A convenience macro to ease interface addition in the _C_
section
of G_DEFINE_DYNAMIC_TYPE_EXTENDED()
. See G_DEFINE_DYNAMIC_TYPE_EXTENDED()
for an example.
Note that this macro can only be used together with the G_DEFINE_DYNAMIC_TYPE_EXTENDED macros, since it depends on variable names from that macro.
Since: 2.24
#define G_ADD_PRIVATE_DYNAMIC(TypeName)
A convenience macro to ease adding private data to instances of a new dynamic
type in the _C_
section of G_DEFINE_DYNAMIC_TYPE_EXTENDED()
. See
G_ADD_PRIVATE()
for details, it is similar but for static types.
Note that this macro can only be used together with the G_DEFINE_DYNAMIC_TYPE_EXTENDED macros, since it depends on variable names from that macro.
Since: 2.38
struct GTypeModule { gchar *name; };
The members of the GTypeModule structure should not
be accessed directly, except for the name
field.
struct GTypeModuleClass { GObjectClass parent_class; gboolean (* load) (GTypeModule *module); void (* unload) (GTypeModule *module); };
In order to implement dynamic loading of types based on GTypeModule,
the load
and unload
functions in GTypeModuleClass must be implemented.
loads the module and registers one or more types using
|
||
unloads the module |